Sign In
Forgot / Lost Password
New Customer?

Range Rover Load Bar Kit

$407.00 AUD

A pair of gutter mount load bars used when there is not a need for a full rack. These allow for a low profile and a smaller footprint.‚Äč

Add To Cart

Front Runner 1475mm Load Bar Kit / Land Rover Range Rover Pre 1996
Product SKU: KRRR005

You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.

  • Ideal for mounting a roof tent or other accessories where a low profile and smaller footprint is preferred.
  • Utilize the same 22mm thick HD aluminium extrusions (slats) as the Slimline Roof Rack.
  • The sliding nut t-slots allow quick fit and removal of accessories and equipment.
  • The t-slots are located on both the upper and lower faces of the load bars and are used for the mounting the feet as well as accessories.

Consisting of:
1 x FITT002 - Fitting Instruction - Kit Vehicle Specific
2 x LASS102 - No 2 Leg 130mm (Pair)
1 x LBSK017 - Load Bar Pair 1475mm
1 x WDLB001 - Roof Load Bar Wind Deflector 10mm

Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight 11kg (25lbs)

To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.

If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.

If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.