<?xml version="1.0" encoding="UTF-8"?>
<root>
  <product>
    <product_id>5548</product_id>
    <product_title><![CDATA[MAXTRAX Shackle Shield]]></product_title>
    <product_content><![CDATA[Looking to safeguard your soft shackles during your off-road expeditions? Look no further than the MAXTRAX Shackle Shield. Engineered to provide an extra layer of defense, this innovative accessory slides snugly over your MAXTRAX Core and Fuse shackles, offering unparalleled protection against abrasions and sharp-edged recovery points. Say goodbye to premature wear and tear on your soft shackles and hello to enhanced safety on the trails. Traditional recovery points, including those integrated into bullbars, often sport a 90-degree edge, posing a risk to delicate rope fibers during recoveries. But fear not! The MAXTRAX Shackle Shield steps in to mitigate these risks. Crafted to fit any soft shackle brand on the market, it can be effortlessly retrofitted to ropes with a diameter of up to 14mm (excluding woven cover sheaths), ensuring compatibility and versatility in every recovery scenario. What sets the MAXTRAX Shackle Shield apart is its commitment to lightweight, metal-free recovery solutions. Constructed from thermoplastic polyurethane, this shield strikes the perfect balance between flexibility and strength, safeguarding your soft shackle fibers without adding unnecessary bulk to your gear setup. Plus, its innovative "U" shaped design minimizes tight radius contraction under load, further extending the lifespan of your soft shackles. Available in three convenient packaging options, including Twin packs in vibrant Safety Orange or sleek Black, as well as a Quad pack featuring a mix of both colors, the MAXTRAX Shackle Shield ensures you're prepared for any recovery scenario that comes your way. Whether you're a seasoned off-roader or a weekend warrior, this essential accessory is a must-have addition to your recovery arsenal. Incorporating the MAXTRAX Shackle Shield into your off-road setup not only enhances safety but also aligns seamlessly with the MAXTRAX ethos of simplicity and reliability. By offering easy-to-use solutions that prioritize your well-being on the trails, MAXTRAX continues to set the standard for vehicle recovery systems in the Australian 4WD community. Features:Acts as a protective sheath for MAXTRAX Core and Fuse shackles Compatible with any soft shackle brand on the market Retrofittable to soft shackle ropes up to 14mm in diameter (excluding woven cover sheaths) Lightweight and metal-free design for enhanced portability Constructed from flexible yet durable thermoplastic polyurethane "U" shaped design minimizes tight radius contraction under load Available in Twin packs (Orange or Black) and Quad packs for added convenience Compatibility:MAXTRAX Shackle Shield is compatible with most aftermarket Rated Vehicle Recovery points with a 40mm + diameter circular aperture (opening) pic Figure1 or elongated design aperture no less than 22mmH x 42mmL pic Figure 2. Figure 1:Figure 2:The MAXTRAX Shackle Shield is compatible with many popular aftermarket brands including but not limited to:Roadsafe Ocam TJM ARB Ironman MCC4x4 KAON Superior Engineering ATI Rockarmor]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/5548/maxtrax-shackle-shield-set-of-4.webp</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>26.36</product_price>
    <product_price_ex_tax>26.363636363636</product_price_ex_tax>
    <product_price_local_tax>26.36</product_price_local_tax>
    <product_created_datetime>2024-04-08 22:50:23</product_created_datetime>
    <product_code></product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>997</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-shackle-shield/</product_uri>
  </product>
  <product>
    <product_id>5438</product_id>
    <product_title><![CDATA[MAXTRAX Indeflate Analogue 2 hose]]></product_title>
    <product_content><![CDATA[Deflating/inflating tyres individually can be a pain; bending over or squatting beside each wheel while you wait for the air to flow in/out of the tyre, constantly stopping to check the pressure. Groan no more! MAXTRAX INDEFLATE makes it quick and easyThe MAXTRAX INDEFLATE is designed (and built in South Africa) to inflate or deflate two tyres simultaneously using our unique dump-valve mechanism that automatically equalises the pressure between the two tyres. The MAXTRAX INDEFLATE features a 700kpa (100psi) combination pressure gauge (manufactured by one of the world's leading suppliers of high-quality pressure and temperature measurement products) so that you can monitor your tyre pressures while inflating, deflating or equalising the tyre pressures. The patented MAXTRAX INDEFLATE dump-valve mechanism is made from highly durable precision engineered Mil-Spec hard-anodised aluminium and features two 3-metre long highly flexible air hoses that are abrasion and ozone resistant and can withstand pressures of up to 2000kpa (300psi) and temperatures of -10ºC to +60ºC. Clip-on valve chucks make it safe, simple, quick and easy to connect to your tyres’ valves. A Schrader valve on one end of the dump valve (the same as the valves on your tyres) makes it easy to connect to an air-compressor to inflate your tyres simultaneously too. The MAXTRAX INDEFLATE comes in a strong and durable carry bag to make it convenient to carry and store.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/5438/MAXTRAX-Indeflate-Analogue-2-hose.webp</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>180.91</product_price>
    <product_price_ex_tax>180.90909090909</product_price_ex_tax>
    <product_price_local_tax>180.91</product_price_local_tax>
    <product_created_datetime>2023-10-12 07:51:52</product_created_datetime>
    <product_code>MTXIND</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>99</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-indeflate-analogue-2-hose-mtxind/</product_uri>
  </product>
  <product>
    <product_id>5437</product_id>
    <product_title><![CDATA[MAXTRAX Indeflate Digital 2 hose]]></product_title>
    <product_content><![CDATA[Deflating/inflating tyres individually can be a pain; bending over or squatting beside each wheel while you wait for the air to flow in/out of the tyre, constantly stopping to check the pressure. Groan no more! MAXTRAX INDEFLATE makes it quick and easyThe MAXTRAX Digital INDEFLATE is designed (and built in South Africa) to inflate or deflate two tyres simultaneously using our unique dump-valve mechanism that automatically equalises the pressure between the two tyres. The MAXTRAX Digital INDEFLATE features a 700kpa (100psi) digital pressure gauge so that you can monitor your tyre pressures while inflating, deflating or equalising the tyre pressures. The patented MAXTRAX INDEFLATE dump-valve mechanism is made from highly durable precision engineered Mil-Spec hard-anodised aluminium and features two 3-metre long highly flexible air hoses that are abrasion and ozone resistant and can withstand pressures of up to 2000kpa (300psi) and temperatures of -10ºC to +60ºC. Clip-on valve chucks make it safe, simple, quick and easy to connect to your tyres’ valves. A Schrader valve on one end of the dump valve (the same as the valves on your tyres) makes it easy to connect to an air-compressor to inflate your tyres simultaneously too. The Digital MAXTRAX INDEFLATE comes in a strong and durable carry bag to make it convenient to carry and store. 2 x AA Batteries included. Batteries last for over 7 months - they haven't gone flat for us yet in over 7 months of testing - we'll keep you updated on the lifespan!]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/5437/Maxtrax-Indeflate-Digital-2-hose.webp</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>180.91</product_price>
    <product_price_ex_tax>180.90909090909</product_price_ex_tax>
    <product_price_local_tax>180.91</product_price_local_tax>
    <product_created_datetime>2023-10-12 07:45:37</product_created_datetime>
    <product_code>MTXINDD2</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>100</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-indeflate-digital-2-hose-mtxindd2/</product_uri>
  </product>
  <product>
    <product_id>4891</product_id>
    <product_title><![CDATA[MAXTRAX Rope Dampener]]></product_title>
    <product_content><![CDATA[The MAXTRAX ROPE DAMPENER has been designed and tested as part of the MAXTRAX RECOVERY SYSTEM. The MAXTRAX RECOVERY SYSTEM is comprised solely of MAXTRAX products and has not been tested with any third party branded products. Critically, if the MAXTRAX RECOVERY SYSTEM is overloaded the MAXTRAX FUSE SHACKLE is designed to be the weakest link, and the expected point of failure. Accordingly, YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM during any vehicle recovery. Position the MAXTRAX ROPE DAMPENER near the MAXTRAX FUSE SHACKLE. The MAXTRAX ROPE DAMPENER can be connected to a Rope Loop with a MAXTRAX FUSE SHACKLE. Only use rated recovery points when using the MAXTRAX RECOVERY SYSTEM. 1. Visually inspect the MAXTRAX ROPE DAMPENER and the MAXTRAX FUSE SHACKLE to ensure they are undamaged and in a safe and usable condition.2. Prepare the MAXTRAX ROPE DAMPENER by placing weighted material or objects such as sand or water bottles into the two sleeves.3. Close the MAXTRAX ROPE DAMPENER Sleeves by folding over the edge 2 times and securing the clips. 4. Using a MAXTRAX FUSE SHACKLE feed the open MAXTRAX FUSE SHACKLE through the loop on the MAXTRAX ROPE DAMPENER and then through the rope loop of a MAXTRAX KINETIC ROPE, MAXTRAX STATIC ROPE, or MAXTRAX WINCH ROPE next to the attached MAXTRAX FUSE SHACKLE in the Recovery System.5. Slide the MAXTRAX FUSE SHACKLE loop over the knot and pull both sides of the MAXTRAX FUSE SHACKLE to tighten the loop, positioning the knot so that the loop pulls at 90 Degrees next to the knot.6. Drape the MAXTRAX ROPE DAMPENER over the attached Rope or allow to hang down. Materials: 420 Denier Oxford Nylon and Polypropylene WebbingWeight: 320gDimensions: 53cm x 39cm unfilledCARE & MAINTENANCEThe various components of the MAXTRAX RECOVERY SYSTEM are of high quality, but due to the very nature of their potential use, or misuse, they are susceptible to severe wear and tear, and to damage such as nicks, cuts, tears, fraying, burns and abrasion. Always carefully inspect MAXTRAX RECOVERY SYSTEM components before each use for wear and tear, cuts, nicks, abraded, burned, melted and frayed areas. DO NOT USE the product if it is damaged, cut, frayed, burned, melted, abraded or partially unwound OR does not have a clearly legible warning label fitted. To help prolong the life of your MAXTRAX RECOVERY SYSTEM components, they should be washed off, rinsed with clean fresh water and air dried at the earliest opportunity after use. To protect from external environmental weather factors, components should be stored inside the MAXTRAX RECOVERY KIT BAG. SAFETY RECOMMENDATIONSIt is recommended that the minimum breaking strength of the strap should be between 2 and 3 times the gross vehicle mass (GVM) of any vehicle it is used with. It is advised that the strap must be suited to the gross vehicle mass (GVM) of the lighter of the 2 vehicles used in the recovery process. SAFETY INSTRUCTIONSUse only MAXTRAX Recovery products in the MAXTRAX RECOVERY SYSTEM. YOU MUST ALWAYS USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM for each vehicle recovery. a) Persons intending to use the strap should consider completing a nationally recognised four-wheel drive training course, or contact a four-wheel drive club for comprehensive advice on the proper selection and use of the strapb) the strap must not be used for lifting or conventional towingc) the persons intending to use the strap must ensure the strap is not damaged and is in a usable conditiond) the strap’s strength and stretch are reduced when the strap is saturated with watere) an object such as a recovery damper, heavy bag or blanket must be draped over the strap during use to reduce any unintentional rebound of the strapf) before attempting the vehicle recovery, passengers of the vehicles involved must: (i) exit the vehicles (ii) stand as far away from the vehicles as possible(iii) avoid standing in the path of the vehicle performing the recovery WARRANTY1 Year]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/4891/maxtrax-dampner.jpg</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>61.82</product_price>
    <product_price_ex_tax>61.818181818182</product_price_ex_tax>
    <product_price_local_tax>61.82</product_price_local_tax>
    <product_created_datetime>2021-10-28 08:15:29</product_created_datetime>
    <product_code>MTXRD</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>100</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-rope-dampener-mtxrd/</product_uri>
  </product>
  <product>
    <product_id>4890</product_id>
    <product_title><![CDATA[MAXTRAX Recovery Kit - Beach]]></product_title>
    <product_content><![CDATA[MAXTRAX now presents the complete Recovery Kit. Don’t get stuck while the tide rolls in…The Beach Kit is a bundle built for open coastal spaces. All the essential equipment wrapped up in our high quality Recovery Kit Bag. Each MAXTRAX Beach Kit Includes: 1 x MAXTRAX [Recovery Kit Bag](https://www.toughtoys.com.au/products/maxtrax-maxtrax-recovery-kit-bag-mtxrkb/)2 x MAXTRAX [Fuse Shackle](https://www.toughtoys.com.au/products/maxtrax-maxtrax-fuse-shackle-mtxfs/)3 x MAXTRAX [Core Shackle](https://www.toughtoys.com.au/products/maxtrax-maxtrax-core-shackle-mtxcs/)1 x MAXTRAX [Kinetic Rope (10m)](https://www.toughtoys.com.au/products/maxtrax-maxtrax-kinetic-rope-mtxkr/) 1 x MAXTRAX [Static Rope (3m)](https://www.toughtoys.com.au/products/maxtrax-maxtrax-static-rope/)1 x MATRAX Rope Dampener For further details on product specifications, click through each product link above.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/4890/maxtrax-beach-kit.jpg</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>631.82</product_price>
    <product_price_ex_tax>631.81818181818</product_price_ex_tax>
    <product_price_local_tax>631.82</product_price_local_tax>
    <product_created_datetime>2021-10-27 22:12:18</product_created_datetime>
    <product_code>MTXRKCB</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>100</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-recovery-kit-beach-mtxrkcb/</product_uri>
  </product>
  <product>
    <product_id>4889</product_id>
    <product_title><![CDATA[MAXTRAX Recovery Kit - Bush]]></product_title>
    <product_content><![CDATA[MAXTRAX now presents the complete Recovery Kit. Don’t get stuck miles from nowhere! The Bush Kit is geared for bush tracks - where you don’t always have much room to play with. Each kit contains a variety of rope lengths - connect them with core shackles to lengthen them according to how much space you have. Each MAXTRAX Bush Kit Includes: 1 x MAXTRAX [Recovery Kit Bag](https://www.toughtoys.com.au/products/maxtrax-maxtrax-recovery-kit-bag-mtxrkb/)2 x MAXTRAX [Fuse Shackle](https://www.toughtoys.com.au/products/maxtrax-maxtrax-fuse-shackle-mtxfs/)5 x MAXTRAX [Core Shackle](https://www.toughtoys.com.au/products/maxtrax-maxtrax-core-shackle-mtxcs/) 1 x MAXTRAX [Kinetic Rope (2m)](https://www.toughtoys.com.au/products/maxtrax-maxtrax-kinetic-rope-mtxkr/)1 x MAXTRAX [Kinetic Rope (3m)](https://www.toughtoys.com.au/products/maxtrax-maxtrax-kinetic-rope-mtxkr/)1 x MAXTRAX [Kinetic Rope (5m)](https://www.toughtoys.com.au/products/maxtrax-maxtrax-kinetic-rope-mtxkr/)1 x MAXTRAX [Static Rope (3m)](https://www.toughtoys.com.au/products/maxtrax-maxtrax-static-rope/)1 x MAXTRAX Rope Dampener For further details on product specifications, click through each product link above.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/4889/Maxtrax-Bush-Kit.jpg</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>813.64</product_price>
    <product_price_ex_tax>813.63636363636</product_price_ex_tax>
    <product_price_local_tax>813.64</product_price_local_tax>
    <product_created_datetime>2021-10-27 20:59:58</product_created_datetime>
    <product_code>MTXRKCBD</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>99</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-recovery-kit-bush-mtxrkcbd/</product_uri>
  </product>
  <product>
    <product_id>4374</product_id>
    <product_title><![CDATA[MAXTRAX Snatch Recovery Kit]]></product_title>
    <product_content><![CDATA[Maxtrax Snatch Recovery Kit contents:1x Maxtrax Kinetic Rope 10m Long2x Maxtrax Fuse Soft Shackles1x Maxtrax Aluminium Recovery Hitch Receiver1x High Quality Maxtrax Recovery Kit Bag to store it in!The new MAXTRAX recovery system in action. After decades of 4x4ing in tough Aussie conditions and witnessing close calls with flying metal during recoveries, MAXTRAX knew there had to be a safer way.The MAXTRAX WINCH ROPE has been designed and tested as part of the MAXTRAX RECOVERY SYSTEM. The MAXTRAX RECOVERY SYSTEM is comprised solely of MAXTRAX products and has not been tested with any third-party-branded products. Critically, if the MAXTRAX RECOVERY SYSTEM is overloaded the MAXTRAX FUSE SHACKLE is designed to be the weakest link, and the expected point of failure. Accordingly, YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM during any vehicle recovery. Only use rated recovery points when connecting the MAXTRAX FUSE SHACKLE or MAXTRAX CORE SHACKLE to a vehicle. Ensure that any person involved reads and understands ALL THE INFORMATION ON THIS packaging, and on any warning labels attached to the MAXTRAX WINCH ROPE.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/4374/Maxtrax-snatch-recovery-kit.png</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>635.45</product_price>
    <product_price_ex_tax>635.45454545455</product_price_ex_tax>
    <product_price_local_tax>635.45</product_price_local_tax>
    <product_created_datetime>2020-10-19 05:09:40</product_created_datetime>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>100</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-snatch-recovery-kit/</product_uri>
  </product>
  <product>
    <product_id>4373</product_id>
    <product_title><![CDATA[MAXTRAX Winch Recovery Kit]]></product_title>
    <product_content><![CDATA[Maxtrax Winch Recovery Kit contents:1x Maxtrax Kinetic Rope 10m Long2 x Maxtrax Fuse Soft Shackle1x Maxtrax Core Shakle1x Maxtrax Aluminium Recovery Hitch Receiver 1x Maxtrax Winch ring 120 1x Maxtrax 5m Static Rope1x Maxtrax Winch Widget1x High Quality Maxtrax Recovery Kit Bag to store it in!The MAXTRAX WINCH ROPE has been designed and tested as part of the MAXTRAX RECOVERY SYSTEM. The MAXTRAX RECOVERY SYSTEM is comprised solely of MAXTRAX products and has not been tested with any third-party-branded products. Critically, if the MAXTRAX RECOVERY SYSTEM is overloaded the MAXTRAX FUSE SHACKLE is designed to be the weakest link, and the expected point of failure. Accordingly, YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM during any vehicle recovery. Only use rated recovery points when connecting the MAXTRAX FUSE SHACKLE or MAXTRAX CORE SHACKLE to a vehicle. Before using the MAXTRAX WINCH ROPE for a vehicle recovery, ensure that any person involved reads and understands any warning labels attached to the MAXTRAX WINCH RECOVERY KIT CONTENTS.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/4373/Maxtrax-winch-recovery-kit.png</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>950.91</product_price>
    <product_price_ex_tax>950.90909090909</product_price_ex_tax>
    <product_price_local_tax>950.91</product_price_local_tax>
    <product_created_datetime>2020-10-19 04:49:04</product_created_datetime>
    <product_code></product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>88</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-winch-recovery-kit/</product_uri>
  </product>
  <product>
    <product_id>4353</product_id>
    <product_title><![CDATA[MAXTRAX Recovery Kit Bag]]></product_title>
    <product_content><![CDATA[MAXTRAX Recovery Kit Bag, 600D Polyester with PVC coating, Polyester lining, designed to keep all of your MAXTRAX recovery kit secure and always within arms reach.The MAXTRAX Recovery Kit Bag is designed & engineered for sand, dirt and snow. The heavy duty, triple-layer, weather resistant carry bag provides functional & stylish storage for all your MAXTRAX Recovery Gear. The large internal cavity is suitable for storing all of your MAXTRAX Recovery Ropes. There are 5 external pockets to store and maximise access to components of the MAXTRAX Recovery System including the MAXTRAX Shackles and the MAXTRAX Winch Ring.This bag comes complete with removable shoulder strap, handles and two external cylindrical pouches for the MAXTRAX Hitch or hydration storage. The MAXTRAX Recovery Kit Bag is all-purpose, with a low centre of gravity and rectangular footprint making it modular and stackable. There are many uses for the MAXTRAX Recovery Kit Bag including gym bag, overnight bag or food storage.  Materials:  600DPolyester with PVC Coating, Polyester Lining.Dimensions of Bag when filled are approximately 600mm(L) x 400mm(W) x 240mm(H)]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/4353/MTXRKB-maxtrax-recovery-bag.jpg</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>171.82</product_price>
    <product_price_ex_tax>171.81818181818</product_price_ex_tax>
    <product_price_local_tax>171.82</product_price_local_tax>
    <product_created_datetime>2020-10-11 14:48:02</product_created_datetime>
    <product_code>MTXRKB</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>99</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-recovery-kit-bag-mtxrkb/</product_uri>
  </product>
  <product>
    <product_id>4352</product_id>
    <product_title><![CDATA[MAXTRAX Static Winch Rope - 30m]]></product_title>
    <product_content><![CDATA[The MAXTRAX WINCH ROPE is a metal-free replacement winch rope and is designed as a safe alternative to steel winch cable, or synthetic winch rope with a metal hook or a metal thimble. The MAXTRAX WINCH ROPE can also be removed from the winch drum and used as a Static Extension rope if required. The MAXTRAX WINCH ROPE has been designed and tested as part of the MAXTRAX RECOVERY SYSTEM. The MAXTRAX RECOVERY SYSTEM is comprised solely of MAXTRAX products and has not been tested with any third-party-branded products. Critically, if the MAXTRAX RECOVERY SYSTEM is overloaded the MAXTRAX FUSE SHACKLE is designed to be the weakest link, and the expected point of failure. Accordingly, YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM during any vehicle recovery. Only use rated recovery points when connecting the MAXTRAX FUSE SHACKLE or MAXTRAX CORE SHACKLE to a vehicle. Before using the MAXTRAX WINCH ROPE for a vehicle recovery, ensure that any person involved reads and understands ALL THE INFORMATION ON THIS packaging, and on any warning labels attached to the MAXTRAX WINCH ROPE.1.    Visually inspect the MAXTRAX WINCH ROPE to ensure it is undamaged and in a safe and usable condition prior to installation, as well as prior to use.2.    Attach the MAXTRAX WINCH ROPE, to the Vehicle’s rated Winch. Ensure that the MAXTRAX WINCH ROPE is fixed to the winch at the end with the Coloured Safety Marking. Once the end of the MAXTRAX WINCH ROPE issecured onto the winch drum, wind the MAXTRAX WINCH ROPE onto the drum to tension the line.3.    Use a MAXTRAX WINCH WIDGET to seat the end of the MAXTRAX WINCH ROPE against the Fairlead protecting the entire rope on the winch.4.    To use the winch, remove the MAXTRAX WINCH WIDGET and attach the loop of the MAXTRAX WINCH ROPE to the MAXTRAX HITCH, MAXTRAX STATIC ROPE, or the vehicle’s rated recovery points using a MAXTRAX CORE SHACKLE or MAXTRAX FUSE SHACKLE.5.    MAXTRAX WINCH ROPE’s integrated Coloured Safety Markings indicate when the rope is nearing maximum extension. Black indicates the last 6m of the MAXTRAX WINCH ROPE, and the Red indicates the last 2m.6.    Use the MAXTRAX WINCH RING to perform a double-line or angled pull.7.    MAXTRAX WINCH ROPES can be connected to other MAXTRAX WINCH ROPES or MAXTRAX STATIC ROPES using MAXTRAX CORE SHACKLES to make a rope the required length for your particular vehicle recovery scenario.8.    Place the MAXTRAX RECOVERY DAMPENER over the MAXTRAX STATIC ROPE or MAXTRAX WINCH ROPE and attach to loop or Shackle.9.    Using MAXTRAX 4WD RECOVERY TRACKS to provide a ramp will greatly reduce the forces and loads on all equipment during the recovery.10.    Clear the area of bystanders and spectators.11.     Commence the recovery by GENTLY taking up the slack in the system.Materials: 'Ultra-High-Molecular-Weight Polyethylene and PolyesterWeight: 2.5 kgLength: 10mm x 30mMBS: 9500 kg/20943 lbCARE & MAINTENANCEThe various components of the MAXTRAX RECOVERY SYSTEM are of high quality, but due to the very nature of their potential use, or misuse, they are susceptible to severe wear and tear, and to damage such as nicks, cuts, tears, fraying, burns and abrasion. Always carefully inspect MAXTRAX RECOVERY SYSTEM components before each use for wear and tear, cuts, nicks, abraded, burned, melted and frayed areas. DO NOT USE the product if it is damaged, cut, frayed, burned, melted, abraded or partially unwound OR does not have a clearly legible warning label fitted. To help prolong the life of your MAXTRAX RECOVERY SYSTEM components, they should be washed off, rinsed with clean fresh water and air dried at the earliest opportunity after use. To protect from external environmental weather factors, components should be stored inside the MAXTRAX RECOVERY KIT BAG. Replacement protective sheaths are available from our website. SAFETY RECOMMENDATIONSIt is recommended that the minimum breaking strength of the strap should be between 2 and 3 times the gross vehicle mass (GVM) of any vehicle it is used with. It is advised that the strap must be suited to the gross vehicle mass (GVM) of the lighter of the 2 vehicles used in the recovery process. SAFETY INSTRUCTIONSUse only MAXTRAX Recovery products in the MAXTRAX RECOVERY SYSTEM. YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM at all times in each vehicle recovery.Vehicle Occupants and bystanders have been killed by flying projectiles (such as towballs) when recovery staps have been used incorrectly. NEVER attach recovery straps to vhicle fittings such as towballs, towbars, tie down points or tow hooks, ONLY attach recovery straps to an approved recovery point/ device that is suitably rated for use with the strap. BEFORE attempting a vehicle recovery all passengers must exit the vehicles and stand as far away as possbile.a)    Persons intending to use the strap should consider completing a nationally recognised four-wheel drive training course, or contact a four-wheel drive club for comprehensive advice on the proper selection and use of the strapb)    the strap must not be used for lifting or conventional towingc)     the persons intending to use the strap must ensure the strap is not damaged and is in a usable conditiond)    the strap’s strength and stretch are reduced when the strap is saturated with watere)    an object such as a recovery damper, heavy bag or blanket must be draped over the strap during use to reduce any unintentional rebound of the strapf)    before attempting the vehicle recovery, passengers of the vehicles involved must:     (i) exit the vehicles     (ii) stand as far away from the vehicles as possible    (iii) avoid standing in the path of the vehicle performing the recovery]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/4352/MTXSWR-maxtrax-static-winch-rope.jpg</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>235.45</product_price>
    <product_price_ex_tax>235.45454545455</product_price_ex_tax>
    <product_price_local_tax>235.45</product_price_local_tax>
    <product_created_datetime>2020-10-11 13:04:02</product_created_datetime>
    <product_code>MTXSWR</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>97</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-static-winch-rope-30m-mtxswr/</product_uri>
  </product>
  <product>
    <product_id>4351</product_id>
    <product_title><![CDATA[MAXTRAX Static Rope]]></product_title>
    <product_content><![CDATA[The MAXTRAX STATIC ROPE is designed, as its name suggests, to be the static element during a vehicle recovery.  The MAXTRAX STATIC ROPE can be used as a load sharing Bridle, Tree Trunk Protector or as an extension strap. The MAXTRAX STATIC ROPE has been designed and tested as part of the MAXTRAX RECOVERY SYSTEM. The MAXTRAX RECOVERY SYSTEM is comprised solely of MAXTRAX products and has not been tested with any third-party-branded products. Critically, if the MAXTRAX RECOVERY SYSTEM is overloaded the MAXTRAX FUSE SHACKLE is designed to be the weakest link, and the expected point of failure. Accordingly, YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM during any vehicle recovery. Only use rated recovery points when connecting the MAXTRAX FUSE SHACKLE or MAXTRAX CORE SHACKLE to a vehicle. Before using the MAXTRAX STATIC ROPE  for a vehicle recovery, ensure that any person involved reads and understands ALL THE INFORMATION ON THIS packaging, and on any warning labels attached to the MAXTRAX STATIC ROPE.HOW TO USE THE MAXTRAX STATIC ROPE AS A LOAD-SPREADING BRIDLE1. Visually inspect the MAXTRAX STATIC ROPE to ensure it is undamaged and in a safe and usable condition.2. Attach the MAXTRAX STATIC ROPE to the stuck vehicle’s rated recovery points using MAXTRAX CORE SHACKLES.3. Attach the MAXTRAX STATIC ROPE to the MAXTRAX KINETIC ROPE or MAXTRAX WINCH ROPE at the bridle’s mid-point using a MAXTRAX FUSE SHACKLE or MAXTRAX CORE SHACKLE.4. Attach the MAXTRAX RECOVERY DAMPENER over the MAXTRAX KINETIC ROPE or MAXTRAX WINCH ROPE to reduce unintentional rebound during the recovery.5. Using MAXTRAX 4WD RECOVERY TRACKS to provide a ramp will greatly reduce the forces and loads on all equipment during the recovery.6. Clear the area of bystanders and spectators.7. Commence the recovery by GENTLY taking up the slack in the system.8. If the recovery is initially unsuccessful, try again with SLIGHTLY more momentumHOW TO USE THE MAXTRAX STATIC ROPE AS A TREE TRUNK PROTECTOR1. Visually inspect the MAXTRAX STATIC ROPE to ensure it is undamaged and in a safe and usable condition.2. Wrap the MAXTRAX STATIC ROPE around a suitable tree trunk, as close to the ground as practical.3. Attach the loops of the MAXTRAX STATIC ROPE to the MAXTRAX WINCH ROPE using a MAXTRAX FUSE SHACKLE or MAXTRAX CORE SHACKLE. 4. Attach the MAXTRAX RECOVERY DAMPENER over the MAXTRAX WINCH ROPE to reduce unintentional rebound during the recovery.5. Using MAXTRAX 4WD RECOVERY TRACKS to provide a ramp will greatly reduce the forces and loads on all equipment during the recovery.6. Clear the area of bystanders and spectators.7. Commence the recovery by GENTLY taking up the slack in the system.HOW TO USE THE MAXTRAX STATIC ROPE AS AN EXTENSION1. Visually inspect the MAXTRAX STATIC ROPE to ensure it is undamaged and in a safe and usable condition.2. Attach the MAXTRAX STATIC ROPE to the MAXTRAX HITCH, MAXTRAX KINETIC ROPE, other MAXTRAX STATIC ROPE, MAXTRAX WINCH ROPE or the vehicle’s rated recovery points using a MAXTRAX CORE SHACKLE or MAXTRAX FUSE SHACKLE.3. MAXTRAX STATIC ROPES can be used individually or connected using MAXTRAX CORE SHACKLES to make a rope the required length for your particular vehicle recovery scenario.4. Place the MAXTRAX RECOVERY DAMPENER over the MAXTRAX KINETIC ROPE or MAXTRAX WINCH ROPE and attach to loop or Shackle.5. Using MAXTRAX 4WD RECOVERY TRACKS to provide a ramp will greatly reduce the forces and loads on all equipment during the recovery.6. Clear the area of bystanders and spectators.7. Commence the recovery by GENTLY taking up the slack in the system.8. If the recovery is initially unsuccessful, try again with SLIGHTLY more momentum. Materials: Ultra-High-Molecular-Weight Polyethylene and PolyesterWeight: 1.3 kgLength: 18mm x 3mMBS: 28900 kg/63713 lbCARE & MAINTENANCEThe various components of the MAXTRAX RECOVERY SYSTEM are of high quality, but due to the very nature of their potential use, or misuse, they are susceptible to severe wear and tear, and to damage such as nicks, cuts, tears, fraying, burns and abrasion. Always carefully inspect MAXTRAX RECOVERY SYSTEM components before each use for wear and tear, cuts, nicks, abraded, burned, melted and frayed areas. DO NOT USE the product if it is damaged, cut, frayed, burned, melted, abraded or partially unwound OR does not have a clearly legible warning label fitted. To help prolong the life of your MAXTRAX RECOVERY SYSTEM components, they should be washed off, rinsed with clean fresh water and air dried at the earliest opportunity after use. To protect from external environmental weather factors, components should be stored inside the MAXTRAX RECOVERY KIT BAG. Replacement protective sheaths are available from our website.SAFETY RECOMMENDATIONSIt is recommended that the minimum breaking strength of the strap should be between 2 and 3 times the gross vehicle mass (GVM) of any vehicle it is used with. It is advised that the strap must be suited to the gross vehicle mass (GVM) of the lighter of the 2 vehicles used in the recovery process.SAFETY INSTRUCTIONSUse only MAXTRAX Recovery products in the MAXTRAX RECOVERY SYSTEM. YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM at all times in each vehicle recovery.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/4351/MTXSR-maxtrax-static-rope.jpg</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>113.64</product_price>
    <product_price_ex_tax>113.63636363636</product_price_ex_tax>
    <product_price_local_tax>113.64</product_price_local_tax>
    <product_created_datetime>2020-10-11 12:37:54</product_created_datetime>
    <product_code></product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>97</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-static-rope/</product_uri>
  </product>
  <product>
    <product_id>4346</product_id>
    <product_title><![CDATA[MAXTRAX Hitch 50]]></product_title>
    <product_content><![CDATA[BONUS OFFER: BONUS MAXTRAX FUSE SHACKLE WITH EVERY HITCH 50 SOLD - VALUED AT $39 Designed exclusively for use with soft shackles; will not allow for fitment of steel shackles.Precision CNC machined from 6061 billet Alumnimum.Anodised finish for corrosion protection.Allows multidirectional pull in both vertical and horizontal axisWeight: 1.45 kgWLL: 8,800 kg / 19,400 lbsDestructive Test Break Load: 44,000 kg / 97,003 lbsFits standard 50mm / 2 inch tow hitch receiversAustralian designed, engineered and testedBacked by a comprehensive Quality Assurance Program, each hitch is individually x-rayed for inclusions.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/4346/MTXH50-maxtrax-hitch-50.jpg</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>226.36</product_price>
    <product_price_ex_tax>226.36363636364</product_price_ex_tax>
    <product_price_local_tax>226.36</product_price_local_tax>
    <product_created_datetime>2020-10-07 06:39:12</product_created_datetime>
    <product_code>MTXH50</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>96</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-hitch-50-mtxh50/</product_uri>
  </product>
  <product>
    <product_id>4345</product_id>
    <product_title><![CDATA[MAXTRAX Fuse Shackle]]></product_title>
    <product_content><![CDATA[The MAXTRAX FUSE SHACKLE has been designed and tested as part of the MAXTRAX RECOVERY SYSTEM. The MAXTRAX RECOVERY SYSTEM is comprised solely of MAXTRAX products and has not been tested with any third-party-branded products.The MAXTRAX FUSE SHACKLE has been designed and tested as part of the MAXTRAX RECOVERY SYSTEM. The MAXTRAX RECOVERY SYSTEM is comprised solely of MAXTRAX products and has not been tested with any third-party-branded products. Critically, if the MAXTRAX RECOVERY SYSTEM is overloaded the MAXTRAX FUSE SHACKLE is designed to be the weakest link, and the expected point of failure. Accordingly, YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM during any vehicle recovery. Only use rated recovery points when connecting the MAXTRAX FUSE SHACKLE or MAXTRAX CORE SHACKLE to a vehicle. Before using the MAXTRAX FUSE SHACKLE for a vehicle recovery, ensure that any person involved reads and understands ALL THE INFORMATION ON THIS packaging, and on any warning labels attached to the MAXTRAX FUSE SHACKLE.1. Visually inspect the MAXTRAX FUSE SHACKLE to ensure it is undamaged and in a safe and usable condition.2. Prepare the MAXTRAX FUSE SHACKLE by loosening and opening the loop sufficiently to allow it to slide over the knot.3. Slide the loop over the knot.4. Feed the loop of the MAXTRAX FUSE SHACKLE through the MAXTRAX HITCH, MAXTRAX KINETIC ROPE, MAXTRAX STATIC ROPE, MAXTRAX WINCH ROPE or the vehicle’s rated recovery point.5. Slide the loop back over the knot, or push the knot through the loop and pull both sides of the MAXTRAX FUSE SHACKLE to tighten the loop, positioning the knot so that the loop pulls at 90 Degrees next to the knot.6. Place the MAXTRAX RECOVERY DAMPENER over the MAXTRAX KINETIC ROPE or MAXTRAX WINCH ROPE and attach to loop or Shackle.7. Using MAXTRAX 4WD RECOVERY TRACKS to provide a ramp will greatly reduce the forces and loads on all equipment during the recovery.8. Clear the area of bystanders and spectators.9. Commence the recovery by GENTLY taking up the slack in the system.10. If the recovery is initially unsuccessful, try again with SLIGHTLY more momentum. Materials: Ultra-High-Molecular-Weight Polyethylene and PolyesterWeight: 120gLength: 550mmMBS: 7000 kg/15432 lbCARE & MAINTENANCEThe various components of the MAXTRAX RECOVERY SYSTEM are of high quality, but due to the very nature of their potential use, or misuse, they are susceptible to severe wear and tear, and to damage such as nicks, cuts, tears, fraying, burns and abrasion. Always carefully inspect MAXTRAX RECOVERY SYSTEM components before each use for wear and tear, cuts, nicks, abraded, burned, melted and frayed areas. DO NOT USE the product if it is damaged, cut, frayed, burned, melted, abraded or partially unwound OR does not have a clearly legible warning label fitted. To help prolong the life of your MAXTRAX RECOVERY SYSTEM components, they should be washed off, rinsed with clean fresh water and air dried at the earliest opportunity after use. To protect from external environmental weather factors, components should be stored inside the MAXTRAX RECOVERY KIT BAG. Replacement protective sheaths are available from our website.SAFETY RECOMMENDATIONSIt is recommended that the minimum breaking strength of the strap should be between 2 and 3 times the gross vehicle mass (GVM) of any vehicle it is used with. It is advised that the strap must be suited to the gross vehicle mass (GVM) of the lighter of the 2 vehicles used in the recovery process.SAFETY INSTRUCTIONSUse only MAXTRAX Recovery products in the MAXTRAX RECOVERY SYSTEM. YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM at all times in each vehicle recovery.a)    Persons intending to use the strap should consider completing a nationally recognised four-wheel drive training course, or contact a four-wheel drive club for comprehensive advice on the proper selection and use of the strapb)    the strap must not be used for lifting or conventional towingc)     the persons intending to use the strap must ensure the strap is not damaged and is in a usable conditiond)    the strap’s strength and stretch are reduced when the strap is saturated with watere)    an object such as a recovery damper, heavy bag or blanket must be draped over the strap during use to reduce any unintentional rebound of the strapf)    before attempting the vehicle recovery, passengers of the vehicles involved must:     (i) exit the vehicles     (ii) stand as far away from the vehicles as possible    (iii) avoid standing in the path of the vehicle performing the recovery]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/4345/MTXFS-Maxtrax-fuse-shackle.jpg</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>35.45</product_price>
    <product_price_ex_tax>35.454545454545</product_price_ex_tax>
    <product_price_local_tax>35.45</product_price_local_tax>
    <product_created_datetime>2020-10-07 05:50:48</product_created_datetime>
    <product_code>MTXFS</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>97</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-fuse-shackle-mtxfs/</product_uri>
  </product>
  <product>
    <product_id>4344</product_id>
    <product_title><![CDATA[MAXTRAX Winch Ring 120]]></product_title>
    <product_content><![CDATA[BONUS OFFER: BONUS MAXTRAX CORE SHACKLE WITH EVERY WINCH RING 120 SOLD - VALUED AT $49  Precision engineered from 6061 billet Alumnimum.Polished and brushed Aluminium finish.Anodised finish for corrosion protection.120mm Diameter.Designed for use with soft shackles and synthetic winch ropes.Weight: 620gWLL: 12,500 kg / 27,557 lbsDestructive Test Break Load: 62,508 kg / 137,806 lbsAustralian designed, engineered and testedBacked by a comprehensive Quality Assurance Program, each ring is individually x-rayed for inclusions.SKU MTXWR Barcode # 9 342256 000696 Brand MAXTRAX Shipping Weight 1.0000kg Shipping Width 0.155m Shipping Height 0.070m Shipping Length 0.155m Shipping Cubic 0.001682000m3 Unit Of Measure ea]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/4344/MTXWR-Maxtrax-winch-ring.jpg</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>180.91</product_price>
    <product_price_ex_tax>180.90909090909</product_price_ex_tax>
    <product_price_local_tax>180.91</product_price_local_tax>
    <product_created_datetime>2020-10-07 05:14:28</product_created_datetime>
    <product_code>MTXWR</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>94</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-winch-ring-120-mtxwr/</product_uri>
  </product>
  <product>
    <product_id>4343</product_id>
    <product_title><![CDATA[MAXTRAX Kinetic Rope]]></product_title>
    <product_content><![CDATA[The MAXTRAX KINETIC ROPES are designed, as their name suggests, to be the kinetic element during a vehicle recovery. The MAXTRAX KINETIC ROPES produce increased kinetic power compared to flat snatch straps, with up to 30% ELONGATION providing a smoother, safer recovery.The MAXTRAX KINETIC ROPES have been designed and tested as part of the MAXTRAX RECOVERY SYSTEM. The MAXTRAX RECOVERY SYSTEM is comprised solely of MAXTRAX products and has not been tested with any third-party-branded products. Critically, if the MAXTRAX RECOVERY SYSTEM is overloaded the MAXTRAX FUSE SHACKLE is designed to be the weakest link, and the expected point of failure. Accordingly, YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM during any vehicle recovery. Only use rated recovery points when connecting the MAXTRAX FUSE SHACKLE or MAXTRAX CORE SHACKLE to a vehicle. Before using the MAXTRAX KINETIC ROPES for a vehicle recovery, ensure that any person involved reads and understands ALL THE INFORMATION ON THIS packaging, and on any warning labels attached to the MAXTRAX KINETIC ROPES.1.        Visually inspect the MAXTRAX KINETIC ROPES to ensure it is undamaged and in a safe and usable condition.2.        Attach the MAXTRAX KINETIC ROPES to the MAXTRAX HITCH, other MAXTRAX KINETIC ROPES, MAXTRAX STATIC ROPE or the vehicle’s rated recovery points using a MAXTRAX CORE SHACKLE or MAXTRAX FUSE SHACKLE.3.        MAXTRAX KINETIC ROPES can be used individually or connected using MAXTRAX CORE SHACKLES to make a rope the required length for your particular vehicle recovery scenario4.        Place the MAXTRAX RECOVERY DAMPENER over the MAXTRAX KINETIC ROPE or MAXTRAX WINCH ROPE and attach to loop or Shackle.5.        Using MAXTRAX 4WD RECOVERY TRACKS to provide a ramp will greatly reduce the forces and loads on all equipment during the recovery.6.        Clear the area of bystanders and spectators.7.        Commence the recovery by GENTLY taking up the slack in the system.8.        If the recovery is initially unsuccessful, try again with SLIGHTLY more  momentum. Materials: Nylon 66 and PolyesteMAXTRAX Kinetic Rope 2mWeight: 1.4 kgLength: 24mm x 2mMBS: 12000 kg/26455 lb MAXTRAX Kinetic Rope 3mWeight: 1.8 kgLength: 24mm x 3mMBS: 12000 kg/26455 lb MAXTRAX Kinetic Rope 5mWeight: 2.5 kgLength: 24mm x 5mMBS: 12000 kg/26455 lb MAXTRAX Kinetic Rope 10mWeight: 4.3 kgLength: 24mm x 10mMBS: 12000 kg/26455 lbCARE & MAINTENANCEThe various components of the MAXTRAX RECOVERY SYSTEM are of high quality, but due to the very nature of their potential use, or misuse, they are susceptible to severe wear and tear, and to damage such as nicks, cuts, tears, fraying, burns and abrasion. Always carefully inspect MAXTRAX RECOVERY SYSTEM components before each use for wear and tear, cuts, nicks, abraded, burned, melted and frayed areas. DO NOT USE the product if it is damaged, cut, frayed, burned, melted, abraded or partially unwound OR does not have a clearly legible warning label fitted. To help prolong the life of your MAXTRAX RECOVERY SYSTEM components, they should be washed off, rinsed with clean fresh water and air dried at the earliest opportunity after use. To protect from external environmental weather factors, components should be stored inside the MAXTRAX RECOVERY KIT BAG. Replacement protective sheaths are available from our website. SAFETY RECOMMENDATIONSIt is recommended that the minimum breaking strength of the strap should be between 2 and 3 times the gross vehicle mass (GVM) of any vehicle it is used with. It is advised that the strap must be suited to the gross vehicle mass (GVM) of the lighter of the 2 vehicles used in the recovery process.SAFETY INSTRUCTIONSUse only MAXTRAX Recovery products in the MAXTRAX RECOVERY SYSTEM. YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM at all times in each vehicle recovery.a)    Persons intending to use the strap should consider completing a nationally recognised four-wheel drive training course, or contact a four-wheel drive club for comprehensive advice on the proper selection and use of the strapb)    the strap must not be used for lifting or conventional towingc)     the persons intending to use the strap must ensure the strap is not damaged and is in a usable conditiond)    the strap’s strength and stretch are reduced when the strap is saturated with watere)    an object such as a recovery damper, heavy bag or blanket must be draped over the strap during use to reduce any unintentional rebound of the strapf)    before attempting the vehicle recovery, passengers of the vehicles involved must:     (i) exit the vehicles     (ii) stand as far away from the vehicles as possible    (iii) avoid standing in the path of the vehicle performing the recovery]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/4343/MTXKR-maxtrax-kinetic-rope.jpg</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>90.91</product_price>
    <product_price_ex_tax>90.909090909091</product_price_ex_tax>
    <product_price_local_tax>90.91</product_price_local_tax>
    <product_created_datetime>2020-10-07 04:48:02</product_created_datetime>
    <product_code>MTXKR</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>98</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-kinetic-rope-mtxkr/</product_uri>
  </product>
  <product>
    <product_id>4342</product_id>
    <product_title><![CDATA[MAXTRAX Core Shackle]]></product_title>
    <product_content><![CDATA[The MAXTRAX CORE SHACKLE is designed to be at the CORE of two interacting MAXTRAX Products. The CORE SHACKLE is designed for use with the MAXTRAX WINCH RING 120. The MAXTRAX CORE SHACKLE has been designed and tested as part of the MAXTRAX RECOVERY SYSTEM. The MAXTRAX RECOVERY SYSTEM is comprised solely of MAXTRAX products and has not been tested with any third-party-branded products. Critically, if the MAXTRAX RECOVERY SYSTEM is overloaded the MAXTRAX FUSE SHACKLE is designed to be the weakest link, and the expected point of failure. Accordingly, YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM during any vehicle recovery. Only use rated recovery points when connecting the MAXTRAX FUSE SHACKLE or MAXTRAX CORE SHACKLE to a vehicle. Before using the MAXTRAX CORE SHACKLE for a vehicle recovery, ensure that any person involved reads and understands ALL THE INFORMATION ON THIS packaging, and on any warning labels attached to the MAXTRAX CORE SHACKLE.1. Visually inspect the MAXTRAX CORE SHACKLE to ensure it is undamaged and in a safe and usable condition.2. Prepare the MAXTRAX CORE SHACKLE by loosening and opening the loop sufficiently to allow it to slide over the knot.3. Slide the loop over the knot.4. Feed the loop of the MAXTRAX CORE SHACKLE through the MAXTRAX HITCH, MAXTRAX KINETIC ROPE, MAXTRAX STATIC ROPE, MAXTRAX WINCH ROPE, MAXTRAX WINCH RING or the vehicle’s rated recovery point.5. Slide the loop back over the knot, or push the knot through the loop and pull both sides of the MAXTRAX CORE SHACKLE to tighten the loop, positioning the knot so that the loop pulls at 90 Degrees next to the knot.6. Place the MAXTRAX RECOVERY DAMPENER over the MAXTRAX KINETIC ROPE or MAXTRAX WINCH ROPE and attach to loop or Shackle.7. Using MAXTRAX 4WD RECOVERY TRACKS to provide a ramp will greatly reduce the forces and loads on all equipment during the recovery.8. Clear the area of bystanders and spectators.9. Commence the recovery by GENTLY taking up the slack in the system.10. If the recovery is initially unsuccessful, try again with SLIGHTLY more momentum. Materials: Ultra-High-Molecular-Weight Polyethylene and PolyesterWeight: 180gLength: 550mmMBS: 14000 kg/30864 lbCARE & MAINTENANCEThe various components of the MAXTRAX RECOVERY SYSTEM are of high quality, but due to the very nature of their potential use, or misuse, they are susceptible to severe wear and tear, and to damage such as nicks, cuts, tears, fraying, burns and abrasion. Always carefully inspect MAXTRAX RECOVERY SYSTEM components before each use for wear and tear, cuts, nicks, abraded, burned, melted and frayed areas. DO NOT USE the product if it is damaged, cut, frayed, burned, melted, abraded or partially unwound OR does not have a clearly legible warning label fitted. To help prolong the life of your MAXTRAX RECOVERY SYSTEM components, they should be washed off, rinsed with clean fresh water and air dried at the earliest opportunity after use. To protect from external environmental weather factors, components should be stored inside the MAXTRAX RECOVERY KIT BAG. Replacement protective sheaths are available from our website. SAFETY RECOMMENDATIONSIt is recommended that the minimum breaking strength of the strap should be between 2 and 3 times the gross vehicle mass (GVM) of any vehicle it is used with. It is advised that the strap must be suited to the gross vehicle mass (GVM) of the lighter of the 2 vehicles used in the recovery process. SAFETY INSTRUCTIONSUse only MAXTRAX Recovery products in the MAXTRAX RECOVERY SYSTEM. YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM at all times in each vehicle recovery.a)    Persons intending to use the strap should consider completing a nationally recognised four-wheel drive training course, or contact a four-wheel drive club for comprehensive advice on the proper selection and use of the strapb)    the strap must not be used for lifting or conventional towingc)     the persons intending to use the strap must ensure the strap is not damaged and is in a usable conditiond)    the strap’s strength and stretch are reduced when the strap is saturated with watere)    an object such as a recovery damper, heavy bag or blanket must be draped over the strap during use to reduce any unintentional rebound of the strapf)    before attempting the vehicle recovery, passengers of the vehicles involved must:     (i) exit the vehicles     (ii) stand as far away from the vehicles as possible    (iii) avoid standing in the path of the vehicle performing the recoverySKU MTXCS Barcode # 9 342256 000719 Brand MAXTRAX Shipping Weight 0.5000kg Shipping Width 0.270m Shipping Height 0.050m Shipping Length 0.230m Shipping Cubic 0.003105000m3]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/4342/MTXCS-maxtrax-core-shackle.jpg</product_icon>
    <product_brand_id>48</product_brand_id>
    <product_price>44.55</product_price>
    <product_price_ex_tax>44.545454545455</product_price_ex_tax>
    <product_price_local_tax>44.55</product_price_local_tax>
    <product_created_datetime>2020-10-07 04:10:31</product_created_datetime>
    <product_code>MTXCS</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>88</product_inventory_level>
    <product_uri>/products/maxtrax-maxtrax-core-shackle-mtxcs/</product_uri>
  </product>
</root>
