Sign In
Forgot / Lost Password
New Customer?

70s Landcruiser Recovery Points

$145.00 AUD

Off road driving demands for strong, reliable recovery points to cope with a huge variety of recovery situations




70 Series Landcruiser Recovey Points (Pair)- Standard length
Product Code: RP-CRU70
Product Description: 70 Series Lancruiser Front Recovery Points (Pair) Standard length with a WLL (Working Load Limit) of 5,000kgs

70 Series Landcruiser Recovey Points (Pair)- Extended length
Product Code: RP-CRU70E
Product Description: 70 Series Lancruiser Front Recovery Points (Pair) Extended length with a WLL (Working Load Limit) of 5,000kgs

75 Series Landcruiser Recovery Points (Pair) 

Prouct Code: RP-CRU75
Product Description: 75 Series Landcruiser Front Reovery Points (Pair) with a WLL (WOrking Load Limit) of 5,000kgs

70 Series landcruiser Recovey Points Kit - Standard length
Product Code: RP-CRU70KIT
Product Description: 70 Series Landcruiser Front Recovery Points (Pair) Standard length with a WLL (Working Load Limit) of 5,000kgs
- 8,000Kg rated equalizer (bridle) strap - 2 off 4.7T bow shackles

70 Series Landcruiser Recovey Points (Pair)- Extended length
Product Code: RP-CRU70EKIT
Product Description: 70 Series Lancruiser Front Recovery Points (Pair) -standard length with a WLL (Working Load Limit) of 5,000kgs

The standard points on the front of a 4WD are primarily designed for tying down your vehicle during transit. Some vehicles come with a stronger point on the front but this still hasn't been tested by the manufacturer and rated for recovery or towing purposes. All Road Safe tow points have been destruction tested and give a Working Load Limited (WWL). In most cases the points were destruction tested up to 18,000Kgs+ to ensure they have the ability to cope with a variety of potential recovery situations. These points are designed to work with 3.25T bow shackles.

All of our tow points have the following features:
Destruction tested and rated with a WWL of 3,250Kgs to 5,000kgs (part depending)
Hi-vis yellow paint as required by mining regulations
Made from 10mm thick SS41 carbon steel plate
Hole for mounting of bow shackle
Easy fit - no cutting or welding required
Bolts and nuts and crush tubes are included
Also included in the kits is:
8,000Kg rated equaliser (bridle) strap
2 off 3.25T/4.7T bow shackles

For best results and safety, it is advised to have two of these points fitted and use a bridle / equaliser strap to even the loads through both points. When using the bow shackles with this point, ensure the "bow"of the shackle is attached to the point and the pin of the shackle has the strap attached to it. This will then enable the shackles to rotate to different angles as your vehicle is towed. The equaliser strap supplied has a sleeve in the middle to ensure the strap you attach to it doesn't damage the equaliser strap.