Sign In
Forgot / Lost Password
New Customer?

3 Piece Kit Front, Diff/Sump and Transmission Plates Suitable for Nissan Navara NP300 D23

Australian made vehicle under body protection.

$586.36 AUD
or 4 payments of $146.59 with
Paypal
Afterpay







Bash Plates Suitable for Nissan Navara NP300 D23  2015 – Current

* This product is Stainless steel with Vents. Images on vehicle show the additional Transmission Plate at rear not shown in first product image.  *Fits with all major bull bars if they retain the factory tin plate.

What You Need to Know:

  • Stainless is superior alternative to Mild Steel, this will Not crack over time and is stronger and lighter. No need for painting and rust proof.
  • Fits using all factory bolt holes and new bolts supplied
  • Mounts are only required once the factory mounts have broken. This happens due to poor welds and being hit while 4x4ing. Our Custom Offroad Triton Mq has the same chassis and took us over a year to break one mount with some pretty heavy driving

Our Custom Offroad designed bash plates will fit all new models from 2015. The plates have been designed to replace the front factory plate and cover underneath the motor from the cross member the factory front plate finishes to the the next cross member towards the rear of the vehicle. We always recommend buying the 3 piece set but unfortunately some Bull Bars remove the front plate top mounting brackets.

*Before you purchase a Bull Bar check it does not remove the front plate top mounting brackets!!

  • Plates are supplied with vents.
  • Available in 3mm Stainless Steel.
  • Australian Made, all our plates are made right here in Brisbane!
  • 3 piece Front, Diff/Sump and Transmission Guard Combo
  • Replace the 1.5mm standard tin plates.
  • Slim Design for maximum clearance, no modifications and only 5 mins to fit.
  • We recommend using the standard bolts as the high Tensile put to much pressure on the mounts.
  • Does not fit with a Diff Drop.

 Stainless Steel is a far superior metal that endure a lot more hits and beach driving. The most popular setup is 3mm stainless, these plates are great for general 4wding, will last you for years and give you piece of mind. *PLEASE NOTE: This product is Stainless steel with Vents. Images on vehicle show the additional Transmission Plate at rear not shown in first product image. 

Tough Toys Installation

Tough Toys partners with a workshop in Moorooka in QLD for installation of our 4x4 accessories. We can also arrange direct shipping to your preferred workshop anywhere in Australia.

Contact us today for an installation quote!


Do you own a workshop doing fitting and installation work? We're looking for partners like you to install our products and accessories on our customers vehicles.

Contact us and become an installation partner today!


Installation Recommendations

We strongly recommend having vehicle accessories products installed by a professional workshop for the best results and to ensure proper operation.

Additionally, please be aware that the installation of aftermarket modifications to your vehicle may affect its compliance with local road use regulations. We advise you to consult with your local authorities and verify the necessary certification or compliance requirements to remain legal for on-road use of your vehicle.

Product Specifications

Shipping Dimensions (LWH) 1500mm x 500mm x 500mm
Shipping Weight 13000 grams

Product Availability

Experience fast fulfillment with our products, with most orders typically ready to ship within 2-3 days of purchase. While we strive for efficiency, occasional delays may occur, and we appreciate your understanding as we work to get your order to you as quickly as possible.

Please contact us for all product enquiries, stock availability, order status, product suitability or anything needed urgently, and we'll be happy to help.



Recommended for you