Diamond Back Cover Single/Double/Triple
If you need more load bars to help maximize your cargo carrying ability, this specifically designed kit for your Diamond Back Cover adds more.
-
Brand :Front Runner 4x4
2259 If you need more load bars to help maximize your cargo carrying ability, this specifically designed kit for your Diamond Back Cover adds one more. The low-profile Load Bar solution lets you easily transport your gear over the bed of your truck, and the Diamond Back HD or SE Cover, so you never have to sacrifice adventure.
A Pickup Bed Load Bar kit used to create a Triple Load Bar Kit over the bed of your truck when fitted with a Double Load Bar DiamondBack HD or SE Cover kit. This low profile addition includes 2 Pickup Roll Top Leg Mounts, 1 1475mm Load Bar and fitting instructions.
- The Load Bar mounts via Pickup Roll Top Load Mounts that bolt directly onto a set of DiamondBack Cover Load Bed Tracks.
- Converts the Diamond Back Cover Double Load Bar Kit into a Diamond Back Cover Triple Load Bar Kit.
- Allows for gear to be mounted above the pickup’s load bed.
- The load bed retains its load-carrying ability, while the drop down door functions as usual.
- Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
- The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
- Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
- Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: These tracks DO NOT work with DiamondBack 180 and DiamondBack 270 models.
KRHL003 - Diamond Back Cover Single Load Bar Kit
Consisting of:
1 x LASS028 - Pickup Roll Top Leg Mount - by Front Runner
1 x RRAC044 - Slat to Load Bar Conversion end Cap Kit - by Front Runner
1 x RRSS1475 - 1475mm Slat - by Front Runner
Consisting of:
2 x LASS028 - Pickup Roll Top Leg Mount - by Front Runner
1 x RRAC044 - Slat to Load Bar Conversion end Cap Kit - by Front Runner
2 x RRSS1475 - 1475mm Slat - by Front Runner
1 x TRAC011 - DiamondBack Cover Load Bed Tracks - by Front Runner
Consisting of:
3 x LASS028 - Pickup Roll Top Leg Mount - by Front Runner
2 x RRAC044 - Slat to Load Bar Conversion end Cap Kit - by Front Runner
3 x RRSS1475 - 1475mm Slat - by Front Runner
1 x TRAC011 - DiamondBack Cover Load Bed Tracks - by Front Runner
Installation-Instructions-for-TRAC011.pdf
Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
