A pair of track mount load bars used when there is not a need for a full rack. These allow for a low profile and a smaller footprint.
Brand :Front Runner 4x4
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
KRTL038 - Suitable for Toyota Land Cruiser 78 3-Door Wagon Load Bar Kit / Gutter Mount - by Front Runner
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x RRAC044 - SLAT TO LOAD BAR CONVERSION END CAP KIT - by Front Runner
2 x RRSS1425 - 1425mm Slat - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
Approximate Installed Weight 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
Width 120mm (5")
Length 1545mm (61")
Height 175mm (7")
Weight 8.3kg (18.4lbs)