This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 3 pairs of Rail Grip Feet
to mount the Slimline II Tray to the Flush Rails of your Range Rover (L405). This system installs easily with off-road tough feet that grip onto the existing factory/OEM flush rails. No drilling required
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your
NOTE: Your vehicle must be equipped with the factory/OEM Flush Rails in order to use this rack kit.
This rack kit can be removed leaving your vehicle’s roof and flush rails in their original condition.
For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your
vehicle. Front Runner Foot Rail solutions can be installed by removing the factory flush rails or used if no factory flush rails are fitted.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRRR009T - Land Rover Range Rover (2013-Current) Slimline II Roof Rack Kit - by Front Runner
3 x GOFR001 - Rail Foot Base (Pair) - by Front Runner
3 x GOFR014 - Flush Rail Grab-On Outer Grips / No. 6 - by Front Runner
3 x GOFR031 - Flush Rail Grab-On Inner Grips / B - by Front Runner
1 x RRSTG07 - Slimline II Tray - 1345mm(W) X 1358mm(L) - by Front Runner
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
Approximate Installed Weight 24kg (53lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II
Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the
height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to
determine the height of the rack from the crown (highest point) of the vehicles roof.