Slimsport Roof Rack Suitable For Toyota 4Runner 2010

Slimsport Roof Rack Suitable For Toyota 4Runner 2010 - Current / Light Bar Ready

Brand :Front Runner 4x4

$1,318.18 AUD

or 4 payments of $329.55 with
Paypal

Learn More
or 4 payments of $329.55 with
Afterpay

Learn More

Description

The Slimsport Roof Rack Kit / Lightbar ready to suit Toyota 4Runner (2010-Current) - by Front Runner was built for your best adventures. Its wind fairing comes ready for mounting a light bar, for all the drives after dusk. The rack is compatible with most Front Runner accessories, so building the perfect setup for a day, weekend or week out in the wild is easier than ever.

Configure your Slimsport Rack to suit any adventure by adding the RACK ACCESSORIES or explore them later when a new adventure calls.

This low-profile flat deck Slimsport rack has a load carrying area of 2228mm (87.7") x 1181mm (46.5").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport Side Mount Accessory Bracket / Small – by Front Runner for most Front Runner side mount accessories (sold separately).
Included in the Toyota 4Runner (2010-Current) Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB / 12V/24V / Single Mount (sold separately).
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Uses factory fixing points with no drill required front foot as standard but also includes hardware included for drill option (recommended).
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
Note: Light Bar Not Included

Consisting of:
1x KSTF001 - Toyota 4Runner (2010-Current) SlimSport Roof Rack Kit
1x RRAC195 - Toyota4Runner Slimsport Rack 40" LBar Wind Fairing

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Approximate Installed Weight: 39.95kg (88.07lbs)

Assembled Rack Kit Dimensions:
2228mm (87.7") L x 1181mm (46.5") W x 121mm (4.7") H

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.

NOTE

We strongly recommend having vehicle accessories products installed by a professional workshop for the best results and to ensure proper operation.

Additionally, please be aware that the installation of aftermarket modifications to your vehicle may affect its compliance with local road use regulations. We advise you to consult with your local authorities and verify the necessary certification or compliance requirements to remain legal for on-road use of your vehicle.