Prev | Next Share Print DTX4000 Dual Receive UHF CB Radio $ 449.00 RRP 1 Review(s) | Add Your Review Like having two radios in one, the dual recieve allows you to do just that!
Brand :Oricom
Like having two radios in one, the dual receive function allows you to receive and listen to two different channels simultaneously without compromising the regular features you’d expect from a UHF CB Radio. Select one channel for road condition updates and the second to keep up with your convoy and hear more of what’s going on at once.
KEY FEATURES
• Dual receive
• IP54 dust and splash resistant
• 12/24 volt operation
• 3 memory groups of 16 channels per group (PC programmable)
• Removable front panel
• Radio can be mounted with the speaker facing upwards or downwards
• 96 multi-colour backlit display
• Back light brightness (5 pre-set levels plus auto)
• Fast scanning 80 channels within 3 seconds
• Rotary volume/channel and squelch control
• Duplex
• 38 CTCSS & 104 DCS codes
• Heavy duty diecast metal chassis
• Slide-in mounting bracket
• Auto power off (off/1h/2h/4h)
• 3.5mm external jack (for optional external speaker or PA adaptor)
GENERAL | |
Compliance | AS/NZS 4365:2011 |
Frequency Range TX/RX | 476.425 - 477.4125 MHz |
Number of TX/RX Channels | 80 UHF CB Channels (75 voice) |
Channel Spacing TX/RX | 12.5KHz |
Operating modes | Simplex, Repeater TX offset (+750KHz) |
Scanning Speed | 50 msec per channel |
Antenna Impedance | 50 Ohms Operating Volts nominal 13.8VDC to 28VDC |
Operating Volts Range | 10 to 30VDC |
Over Voltage Protection | Diode and Voltage regulator system |
Over Current Protection | 2 AMP fuse |
Reverse Polarity Protection | Shunt diode |
Frequency stability | +/- 5 ppm |
TRANSMITTER | |
RF Output Power | 5 watts max |
Modulation | F3E(FM) |
Maximum deviation | 2.5KHz |
Spurious Emissions | < -30dBm |
TX Audio pre-emphasis | +6dB/Octave from 300Hz to 3KHz |
Current consumption during TX | 1.7 AMP with 50 ohm antenna termination |
RECEIVER | |
Circuit Type | Dual conversion super heterodyne |
Intermediate Frequencies | 1st IF : 21.4MHz , |
2nd IF : 450KHz for Main RX | |
1st IF : 38.85MHz, | |
2nd IF : 455KHz for Sub RX | |
Maximum usable sensitivity | -123dBm for 12dB SINAD un-weighted |
Audio output power | > 2 Watts at 8 ohm load RX Audio de-emphasis to 3KHz |
+6dB/Octave from 300Hz | |
Signal to Noise Ratio | > 40dB |
Conducted Spurious Emission | > -57dBm |
MECHANICAL | |
Dimensions H x W x D | 31 X 128 X 147 |
Weight | 548g transceiver only |
Learn More
Learn More