UHF CB Radio UHF180 Remote Head
5watt CB radio with Remote Head
-
Brand :Oricom
The UHF180 5 watt UHF CB is a remote head unit that is so trim that it can easily be attached to the most cluttered dashboard. Its compact transceiver is robust and can be easily installed in tight spaces. The external heat-sink cools quickly, ensuring the radio maintains the highest possible output power.
• 2 mounting brackets and fittings
| Compliance | AS/NZS 4365:2011 |
| Frequency Range TX | 476.425 - 477.4125 MHz |
| Frequency Range RX | 400 - 512MHz |
| Number of TX/RX Channels | 80 UHF CB |
| Number of user programmable RX only Channels | 200 |
| Channel Spacing TX/RX | 12.5KHz |
| Wide Band Scanner | 400~512, 400~420, 420~450, 450~470, 470~512mHz |
| Operating modes | Simplex, Repeater TX offset (+750kHz) |
| Selcall ID | 5 Digit with alpha display |
| Scanning Speed | 130 msec per channel |
| Antenna Impeadance | 50 Ohms |
| Operating Volts nominal | 13.8 VDC |
| Operating Volts Range | 10 to 15 VDC |
| Over Voltage Protection | Diode and voltage regulator |
| Over Current Protection | 2 Amp fuse |
| Reverse Polarity Protection | Shunt diode |
| Frequency Stability | +/- 5ppm |
| Transmitter | |
| RF Output Power | Nominal 5watts |
| Modulation | F3E (FM) |
| Maximum Deviation | 2.5kHz |
| Spurious Emissions | < -30 dBm |
| TX Audio pre-emphasis | + 6dB/octave from 300Hz to 3kHz |
| Current Consumption during TX | 1.6 Amps with 50 Ohm antenna termination |
| Reciever | |
| Circuit Type | Dual conversion superheterodyne |
| IF Frequencies | 1st IF = 30.85MHz , 2nd IF = 450kHz |
| Current Consumption during RX | 200mA |
| Sensitivity | > -123dBm at 12dB SINAD |
| Sensitivity Receive only channels | < -110dBm for 12dB SINAD |
| Selectivity | +/-3.75kHz min @ 3dB to +/-15kHz max @ 40dB |
| Intermodulation Immunity | > 70dB |
| Spurious Immunity | > 70dB |
| Audio Output Power | 3 Watts Maximum |
| RX Audio de-emphasis | -6dB/octave 300Hz to 3kHz |
| Audio frequency response | 300Hz to 3kHz |
| External speaker jacks | One on transceiver one on head unit for optional 8 Ohm mono speaker (3.5mm jack.) |
| Remote head (only) | |
| Dimensions | 30 (d) x 110 (w) x 29 (h) mm |
| Weight | 150g |
| Transciever | |
| Dimensions | 135 (d) x 110 (w) x 29 (h) mm |
|
Weight Cable length for remote head |
420g 1.9m |
