Performance Intercooler & Pipe Kit Suitable For VW Amarok

Brand :PWR

$1,898.18 AUD

Pay in 4 with Paypal

is available on orders under $1,500.00
Learn More
or 4 payments of $474.55 with
Afterpay

Learn More

Powder Coat Black:

Description

PWR Volkswagen Amarok 2012-2017 2.0L Intercooler + Piping Kit

PWR Volkswagen Amarok 2012-2017 2.0L Intercooler + suits all manual and automatic 2012-2017 2.0L models.

Turn your Volkswagen Amarok into a beast with PWR's fully engineered intercooler kit. It takes less than 3 hours to unleash your 4x4's full potential and transform your driving experience.

WHERE WOULD YOU GO IF YOU HAD MORE POWER?

When you’re off road in challenging situations, you want maximum throttle response, torque and power. We have the ultimate solution for your Amarok that also provides low fuel consumption.

PWR’s intercooler and pipe kit is specially engineered and made in Australia to boost your Amarok’s torque, power and fuel economy.

By combining the most efficiently-designed intercooler with our unbeatable pipe kit, we have solved the problem of factory hose expansion under pressure, which reduces throttle response. PWR pipe kits are mandrel-bent, hard aluminium piping with high-quality 5 ply silicone joins. PWR’s signature CNC-machined ribbed outlets and the use of premium stainless steel constant tension Murray clamps prevent the hose from blowing off.

PWR’s high flow extruded intercooler core is 31% thicker than the OEM unit, resulting in less pressure drop and improved efficiency. During wind tunnel testing, the intercooler outlet temperature was reduced by over 16°C (23%) more than the OEM unit. With the help of a friend, you can install it yourself in less than 3 hours. Or, get it done for you and take advantage of a tune at the same time. When combined with a mild tune, we’ve achieved torque figures of 434.3Nm and 132.4hp/97.7kW at all four wheels. That’s almost a 16% increase in power, a 12% increase in torque.

16% Power Increase with tune. (PWR achieved 132HP @ the wheels)
12% more Torque with tune. (PWR achieved 434.3Nm @ the wheels)
Extruded tube & fin core for 58% less charge air pressure drop & increased efficiency.
31% thicker core.
Australian engineered & manufactured.
CNC machined billet aluminium outlets used throughout with unique ribbed design helps eliminate hose blow-off issues seen on other kits.
5-Ply Silicone hoses.
High quality Constant tension Murray Clamps.
Full colour fitting instructions are provided for both the intercooler and pipe kit install taking approx 3 hours to fit DIY.

NOTE

We strongly recommend having vehicle accessories products installed by a professional workshop for the best results and to ensure proper operation.

Additionally, please be aware that the installation of aftermarket modifications to your vehicle may affect its compliance with local road use regulations. We advise you to consult with your local authorities and verify the necessary certification or compliance requirements to remain legal for on-road use of your vehicle.