Cross Tie Rod Suitable For Nissan Navara D22
The Roadsafe TR2625HD is a Centre Rod designed for lifted D22 Navaras.
-
Brand :Roadsafe Automotive
The Roadsafe TR2625HD is a Centre Rod designed for lifted D22 Navaras.
In standard height the side rods are more level than on a lifted vehicle so the upward force created to the centre rod is lower. Once the vehicle is lifted the side rod angle increases resulting in greater torsional load being applied to the centre rod.
To combat this increase in torsional load the Roadsafe TR2625HD has been designed with two fixed 'T'studs (rotating only, no articulation) and supplied with spacer shims to allow for the positioning of the centre rod and the lack of tolerance that this dual stud application creates.
Please refer to the fitting instructions on our website.
Please note that the vehicle steering and suspension system was designed for a specific geometry which is changed when the vehicle is raised.
When fitting the TR2625HD centre rod , care must be taken to set up the rod correctly to allow clearance between this and the chassis.
As an added bonus, a SB002 idler reinforcing bracket has also been included in the kit. Installed between the chassis and the idler, the bracket provides support to the bottom of the pivot pin to aid in stopping the side loading from wearing the idler bushing out too quickly.
