Sign In
Forgot / Lost Password
New Customer?

Radius Arm Spacer Washer Suitable For Nissan Patrol

​The High Tensile Roadsafe Radius Arm Spacers, being stronger than standard washers, resist bending and aid in radius arm longevity

$27.27 AUD
Pay in 4 with Paypal
is available on orders over $30.00
Learn More
or 4 payments of $6.82 with
Afterpay Learn More




PATRAMBC The Roadsafe PATRAMBC is basically an upgraded washer, with improved bushing cup. It does not provide for any spacing component. Just replace the original washer with the PATRAMBC which is a stronger replacement with longer side walls - Suit Standard lift

RASWNIS The Roadsafe RASWNIS is our ‘original’ radius arm spacer. The washer is stronger, allows for 15mm ‘push’ of the diff, and has low profile side walls that still offer bush cupping for improved bushing longevity - Suit 2" + lift

RASWNIS2 The Roadsafe RASWNISV2 is our improved version of the original. Still offering 15mm ‘push’ of the diff, and an overall stronger washer, the side walls are increased substantially to provide for better cupping of the bushing and further improved bushing longevity - suit 2" + lift

Designed to fit GQ and GU Patrols with coil front, the Roadsafe Radius Arm Spacer Kit is primarily used to ‘push’ the front diff forward (approx. 15mm) to give better clearance for larger tyres so they don’t hit the front mud flaps and guards.

Another common issue with the Patrols is for the standard radius arm washers to bend following excessive impacts, which can result in premature failure of the arm. Bigger tyres also generally means bigger shocks with longer travel. This increase in travel can put additional stress on the rear radius arm rubber bushings, causing them to distort or become dislodged.

The High Tensile Roadsafe Radius Arm Spacers, being stronger than standard washers, resist bending and aid in radius arm longevity. The Roadsafe Radius Arm Spacers are also designed in such a way as to ‘cup’ the rubber bushing, preventing it from being dislodged, resulting in improved bushing longevity.

It is recommended that you check the clearance from your diff to your panhard rod, at full compression, before and after fitting the Radius Arm Spacers. The Panhard Rod and Diff Pumpkin run very close on some GU Patrol depending upon other suspension work that has been done on the vehicle. Pushing the diff forward with the spacers can result in the panhard rod making contact with the diff or the front of the radius arm, affecting the articulation of the panhard rod, which can place additional stress on the panhard welds and brackets, leading to premature failure.

To view the entire Road Safe range of products, see the catalogue below:

Road-Safe-4wd-Catalogue.pdf (29.4 MB)

We strongly recommend having vehicle accessories products installed by a professional workshop for the best results and to ensure proper operation.

Additionally, please be aware that the installation of aftermarket modifications to your vehicle may affect its compliance with local road use regulations. We advise you to consult with your local authorities and verify the necessary certification or compliance requirements to remain legal for on-road use of your vehicle.