SUITS RADAR DRIVERS SIDE.
– BLACK POWDER COAT Hammertone As Standard
Key Advantages1) Full Bumper Replacement
2) 1 Piece Fully Welded Design.
3) Low Profile 16cm From Badge To Front Of Bar.
4) Extremely Low Weight- 34kg Bullbar, 16kg Winch Cradle & 10Kg Bash Plate.– Holes Are Predrilled For Park Sensors & Suits Tech
Pack ACC Lane Assist ModuleProduct FeaturesINCLUDES WINCH CRADLE – Can Suit Upto 12,000lb Low Mount Winch.
INCLUDES BASH PLATE AND LED FOG LIGHTS
- Made From 8mm Steel Main Winch Cradle & 3mm Side Wings Reinforced
- ADR69 Compliant And Airbag Compatible Tested By ASE
- Meets AS4876.1 2002
- Suits Most Low Mount Winches Upto 12,000LB
Rated Tow Points(3500-4000 Kg Each Tested) Recommended Use With Bridal And Winch Only. Snatch Strap Can Exceed
8T Total That Is Why Recommended As A Tow Point Fits
With Aftermarket Dedicated Recovery Points Such As Roadsafe.
- Powder Coated In Texture Black Or Can Be Colour Matched(Additional Cost)
- Bash Plate Back To Front Diff Included
- Fits Factory Fog Lights
- Loop Does Not Protrude Past The Front Of The Bar
- Can Suit 9inch LED Spot Lights Or LED Bars.
- 2x Spot Light Mounting Points Are Located On The Loop Bar.
- The Bar Can Be Adjusted Approx 20mm From The Fender Or Can Be Adjusted To Sit Flush.
- Its A Complete Bumper Replacement Making Install Time Frame 2.5-4Hr
- Install Difficulty = Medium (Some Trimming Required)
LED BAR CUTOUTS
POWDER COAT PRIMER ONLY option
NO LOOP OPTION
Optional Extras include:
GhostLED XXV 25inch Slinline LED BAR BUILT IN.
This Option Is Only Available When You Are Colour Coding Or RE-Powder Coating. It Takes 3-4 Weeks To Complete As Its Manufactured
This Modifications Includes Cut Out For 25inch Led Bar, Updated Bash Plate To Suit LED Cutout & The 25inch IP65 100W LED BAR.
Not Available For Models With Park Sensors. Colorado 2017, Everest & MK2 Or MK3 Ranger.
Aurora 20INCH LED Cutout
Aurora LED 20 Inch-This Option Is From Factory. It Includes The 20 Inch LED Bar Cutout, You Can Choose With Or Without The Aurora 20
Inch LED BAR.
This Optional Extra Is Stocked In Limited Numbers.
The Aurora LED Bar Is 100 W IP68 Single Row.
4 MM ALLOY BASH PLATE
If You Order 4mm Alloy Bash Plate You Still Get Original Black Bash Plate.
The Bash Plates Can Work Over Each Other Giving Max 6-7mm Total Thickness Or You Can Run Either Separately
4X40W LED LIGHTS
We Have Special Order Extreme Series X-2 Which Includes 4 Off 40W LED Flood Lights Built In.
This Is By Special Order Only And Takes Between 2-3 Months To Arrive As Its Loaded On The Next Available Container.
Tough Toys Installation
Tough Toys partners with a workshop in Moorooka in QLD for installation of our 4x4 accessories. We can also arrange direct shipping to your preferred workshop anywhere in Australia.
Contact us today for an installation quote!
Do you own a workshop doing fitting and installation work? We're looking for partners like you to install our products and accessories on our customers vehicles.
Contact us and become an installation partner today!
We strongly recommend having vehicle accessories products installed by a professional workshop for the best results and to ensure proper operation.
Additionally, please be aware that the installation of aftermarket modifications to your vehicle may affect its compliance with local road use regulations. We advise you to consult with your local authorities and verify the necessary certification or compliance requirements to remain legal for on-road use of your vehicle.
|Shipping Dimensions (LWH)
|1800mm x 500mm x 500mm
Experience fast fulfillment with our products, with most orders typically ready to ship within 2-3 days of purchase. While we strive for efficiency, occasional delays may occur, and we appreciate your understanding as we work to get your order to you as quickly as possible.
Please contact us for all product enquiries, stock availability, order status, product suitability or
anything needed urgently, and we'll be happy to help.