Sign In
Forgot / Lost Password
New Customer?

Extreme Series Bullbar Suitable for Ford Ranger PX1 MK1 2012-2016

The new extreme series x-1 is the ultimate bullbar.

$2,080.91 AUD
Pay in 4 with Paypal
is available on orders under $1,500.00
Learn More
Afterpay is available on orders under $2,000.00
Learn More











- BLACK POWDER COAT Hammertone as standard

Key Advantages

1) Full Bumper Replacement
2) 1 piece fully welded design.
3) Low Profile 150mm From Badge/Grille to front of bar.
4) Extremely Low Weight- 34kg Bullbar, 16kg Winch Cradle & 10Kg bash plate.

INCLUDES WINCH CRADLE - Can suit upto 12,000lb Low mount Winch.

INCLUDES BASH PLATE AND LED FOG LIGHTS

  • Made from 8mm steel main winch cradle & 3mm side wings reinforced
  • ADR69 compliant and airbag compatible Tested by ASE
  • Meets AS4876.1 2002
  • Its a complete bumper replacement making install time frame 2.5-4Hr
  • Suits most low mount winches upto 12,000LB
  • Rated tow points(3500-4000 kg each Tested) Recommended use with bridal and winch only. Snatch strap can exceed 8T total that is why recommended as a tow point Fits with Aftermarket dedicated recovery points such as roadsafe.
  • Powder coated in texture black or can be colour matched(Additional Cost)
  • bash plate back to front diff included
  • Loop does not protrude past the front of the bar
  • Install Difficulty = Medium
  • Can suit LED spot lights or LED bars.
  • 2x Spot light mounting points are located on the loop bar.
  • Approx Weight including Bash plate 55kg

COLOUR CODING-  The standard colour coding is as follows.

1) Main bullbar & Loop colour matched to 4WD.

2) Centre winch section Black Hammertone for durability.

3) Fog Lights - Black Hammertone for durability.

4) Bash Plate - Black Hammertone for durability.

 

Special Orders-

LED BAR CUTOUTS

POWDER COAT PRIMER ONLY option

NO LOOP OPTION

Install-Instruction-Extreme-Series-bullbar-Ford-ranger-PX1.pdf


Optional Extras include:

GhostLED XXV 25inch Slinline LED BAR BUILT IN.
This Option Is Only Available When You Are Colour Coding Or RE-Powder Coating. It Takes 3-4 Weeks To Complete As Its Manufactured Locally.
This Modifications Includes Cut Out For 25inch Led Bar, Updated Bash Plate To Suit LED Cutout & The 25inch IP65 100W LED BAR.
Not Available For Models With Park Sensors. Colorado 2017, Everest & MK2 Or MK3 Ranger.


Aurora 20INCH LED Cutout
Aurora LED 20 Inch-This Option Is From Factory. It Includes The 20 Inch LED Bar Cutout, You Can Choose With Or Without The Aurora 20 Inch LED BAR.
This Optional Extra Is Stocked In Limited Numbers.
The Aurora LED Bar Is 100 W IP68 Single Row.

4 MM ALLOY BASH PLATE
If You Order 4mm Alloy Bash Plate You Still Get Original Black Bash Plate.
The Bash Plates Can Work Over Each Other Giving Max 6-7mm Total Thickness Or You Can Run Either Separately

4X40W LED LIGHTS
We Have Special Order Extreme Series X-2 Which Includes 4 Off 40W LED Flood Lights Built In.
This Is By Special Order Only And Takes Between 2-3 Months To Arrive As Its Loaded On The Next Available Container.





We strongly recommend having vehicle accessories products installed by a professional workshop for the best results and to ensure proper operation.

Additionally, please be aware that the installation of aftermarket modifications to your vehicle may affect its compliance with local road use regulations. We advise you to consult with your local authorities and verify the necessary certification or compliance requirements to remain legal for on-road use of your vehicle.


Recommended for you