Aussie-made, adjustable fishing rod holder for bullbars and boats. Quick-fit, 360° rotation, height adjustable, tough and removable.
Brand :Rodezi Rack
Made in Australia, the Rodezi Adjustable Rod Holder is your go-anywhere, clamp-on solution for bullbars, boats, and storage.
This isn’t your average rod holder. Designed and manufactured right here in Australia, the Rodezi Rod Holder is built tough, installs in seconds, and makes loading and carrying your fishing gear a breeze - whether you’re hitting the tracks or heading for the boat ramp.
It clamps straight onto nudge bars and bullbars with six included sleeves to suit tube sizes from 45mm to 75mm (1¾" to 3"), and is fully height adjustable from 530mm to 830mm (1’9” to 2’9”) perfect for getting your rods up and out of your field of view for safe, comfortable driving.
The 360-degree rotating head means you don’t need to lean over the bonnet to load your rods. Simply swing it around to the front, slot in your rod and reel, and you’re ready to roll. You can even rig up from line to hook without removing the rod from the holder!
Made from 3mm thick anodised aluminium and impact-resistant glass-filled nylon, there are no sharp edges and nothing to scratch your rods, reels, or vehicle. The unique V-cut design holds most reels securely, whether facing up or down – great for keeping gear low-profile when you're weaving through bush tracks.
When the day’s done, just unclamp it and use it to store your rods in the garage. Quick, easy, and versatile.
Heading off for a fishing and 4WD adventure? Make sure your gear’s legal, secure, and easy to handle – with the Rodezi Rod
Holder. Check out the amazing features:
Always check local regulations regarding rod holders while driving.
Yes, when installed correctly. The Rodezi is designed to keep your rods safe, secure, and above your line of sight while travelling. However, fishing rod holder laws vary across Australian states and territories, so you must always check your local regulations before driving with rods fitted.
Simply clamp it on using the supplied sleeves. Six different sizing sleeves are included, covering tube diameters from 45mm to 75mm (1¾" to 3"). There aren't too many bullbars that this mount won't fit! No drilling or permanent modifications required. Once the clamp is installed, screw on the Rodezi aluminium adjustable post, then attach the fishing rod holder cross bar.
Yes – the clamp-on design means you can quickly move it between your vehicle, boat, or even use it at home for storage. It will install on any horizontal tube rail or bullbar hoop. Purchase additional clamps and you can simply screw the aluminium post and rod holder off your bullbar and straight onto your boat without having to remove the rods!
Yes, the holder is fully height adjustable from 530mm to 830mm (1’9” to 2’9”), which gets the fishing rods out of the driver's view.
No. The Rodezi is made from 3mm anodised aluminium and glass-filled nylon with smooth, rounded edges. There are no sharp surfaces to damage your gear or vehicle. This also helps make Rodezi compliant for bullbar mounting in all states of Australia.
Yes - the 360° rotating head makes it easy to adjust to any angle, and you can swing it forward for loading or rigging rods without leaning over the bonnet.
The unique V-cut design of Rodezi holds fishing rod reels securely either facing up or down. Carrying them downwards is especially useful for avoiding snags on bush tracks.
Simply unclamp the Rodezi Fishing Rod Holder from your vehicle and use it in your garage or shed as a handy storage device.
Yes, but NSW is one of the stricter states. Rod holders can’t stick out too far forward of the bull bar, and anything extending excessively may attract a fine. Rodezi, when set up correctly, keeps a low profile and doesn’t create a sharp forward protrusion. NSW law also requires rods to be unrigged while driving — no hooks or lures attached. Rodezi makes this practical since the adjustable height keeps rods up out of your field of view, and the rotating head allows safe loading without leaning over the bonnet.
Yes, provided you mount it sensibly. Queensland requires accessories not to obstruct lights, mirrors, or the driver’s field of vision. Rodezi helps with compliance because its adjustable height lets you position rods above the driver’s sightline, and its rotating head keeps things easy on angled bars. Since it clamps on and off in seconds, you can remove it when not needed to guarantee compliance.
Yes, Rodezi is compliant in VIC so long as it doesn’t block your lights, number plate, or driver visibility. Victoria doesn’t specify a measurement like NSW, but it does apply strict rules against dangerous projections. Rodezi’s smooth edges and adjustable height mean rods sit safely above your line of sight, and its detachable design makes it simple to remove when not in use. Mounting it on the left-hand side is the safest option.
Yes, Rodezi can be used legally in WA when installed correctly. WA’s rules focus on avoiding dangerous projections - accessories can’t stick out sharply past the bull bar or rise above the top bar. Rodezi avoids this by sitting flush and smooth, and its adjustable height means you can position rods so they sit safely above your line of sight. Mounting it on the left-hand side also avoids blocking lights or the driver’s view, and because the rod holder arm detaches in seconds, you can remove it completely when not carrying rods.
Yes, Rodezi is fine in the NT when installed sensibly. The NT doesn’t have rod holder-specific rules, but general standards apply. Rodezi’s flush mounting, smooth edges, and adjustable height help keep rods secure and above the driver’s view. The detachable arm also means you can take it off quickly if you’re not carrying rods.
Yes, Rodezi is legal in Tasmania when fitted correctly. While Tasmania doesn’t have specific rod holder laws, the same rules apply about avoiding dangerous projections and keeping lights and plates unobstructed. Rodezi’s adjustable height makes it easy to keep rods out of your line of vision, and the quick-release clamp means you can remove the holder entirely when not in use.
Yes, as long as it’s mounted safely. South Australian authorities have cautioned against rod holders that protrude dangerously from bull bars. Rodezi avoids this issue with smooth, rounded edges and a detachable holder arm. Its adjustable height means rods are carried clear of the driver’s view, and positioning it on the left-hand side ensures lights and indicators remain unobstructed.
Yes, Rodezi is compliant in the ACT when installed correctly. Like NSW, the ACT focuses on avoiding sharp forward protrusions and ensuring the driver’s view is not blocked. Rodezi’s adjustable height ensures rods can be positioned above the sightline for safe and comfortable driving, and the removable design means you can take it off completely when it’s not needed.
Related Products: