Can't find a suitable place for the number plate (license plate, registration plate) after installing and after market bumper? This
relocation bracket allows you to stay legal and roadworthy by positioning your number plate up on the spare tyre. Also suitable for
Caravans, trailers and swing away rear bumpers.
The Tough Toys - Number Plate Relocation Bracket allows you to position your number plate to the spare tyre carrier on your vehicle, trailer
or caravan. This is required when fitting an aftermarket bumper with wheel carrier arms to a range of 4WD vehicles or any aftermarket rear
bumper to a 2007-2019 Jeep Wrangler JK. Additional wiring is required to connect the included number plate lamp to the existing wiring of
your vehicle or trailer. Rear number plate lamp included is 12v only and ADR & ECE Compliant (48/00).
This product is suitable for caravan owners and manufacturers who do not wish to drill holes in the rear wall of their caravan. It
enables caravan owners to mount the number plate legally to the caravan spare tyre on the rear of the caravan or camper trailer.
- ADR Compliant LED Number plate lamp included
- Suits vehicles with 5x150, 5x139.7, 5x127, 5x114.3 and 6x139.7mm Stud Pattern
- Tested with up to 35" tyres and adjustable bracket allows large offset rims
- Suits all 5 stud Jeep, 5 stud Nissan Patrol, 5 stud Toyota, 5 stud Suzuki, and Toyota Landcruiser with 6 studs
- All hardware included
- Mounts on any tyre carrier including factory ones with 3 studs
- Australian made from tough powder coated 3mm steel
Suits the following vehicles:
- Jeep Wrangler JK & TJ and earlier
- Toyota Landcruiser
- Toyota Landcruiser Prado
- Nissan Patrol GU & GQ, Navara and other models
- Suzuki Jimny
- Mitsubishi Pajero & Triton and other models
- Ford Ranger & F150
- Caravans, trailers & campers with spare wheel carrier on the back
*Always check PCD against list above or ask us about fitment before purchasing.
*Wheel center cap hole MUST be 50mm or larger for bracket to protrude through.
*Some custom wiring may be required to relocate number plate wiring to the spare wheel. (See installation instructions below for more
*Number plate bracket has been designed and tested to be compatible with the Jeep JK Wrangler AEV Rear Tyre Carrier including Fuel
Install difficulty 1/10
Install time 30 min
Plate Relocation Bracket - Installation Instructions.pdf
IP Australia certified registered design
Tough Toys Installation
Tough Toys partners with a workshop in Moorooka in QLD for installation of our 4x4 accessories. We can also arrange direct shipping to your preferred workshop anywhere in Australia.
Contact us today for an installation quote!
Do you own a workshop doing fitting and installation work? We're looking for partners like you to install our products and accessories on our customers vehicles.
Contact us and become an installation partner today!
We strongly recommend having vehicle accessories products installed by a professional workshop for the best results and to ensure proper operation.
Additionally, please be aware that the installation of aftermarket modifications to your vehicle may affect its compliance with local road use regulations. We advise you to consult with your local authorities and verify the necessary certification or compliance requirements to remain legal for on-road use of your vehicle.
|Shipping Dimensions (LWH)
|400mm x 250mm x 150mm
Experience fast fulfillment with our products, with most orders typically ready to ship within 2-3 days of purchase. While we strive for efficiency, occasional delays may occur, and we appreciate your understanding as we work to get your order to you as quickly as possible.
Please contact us for all product enquiries, stock availability, order status, product suitability or
anything needed urgently, and we'll be happy to help.